Order $650 enter coupon code Ship650 to receive free shipping on your order.

 

When renting our equipment the rental center should have the items you need for this equipment.  In the event you need a part/accessory that is not locally available here is a listing of items for you to use.

6″ Backer Pad-6″ diameter disc that screws onto the bottom of the unit at the end of the spindle housing/lower shaft.  This item is constructed of foam with hook and loop covering for easy attachment of sandpaper.  It is sold individually or in a 12 pk.
Buy Now
Backer Pad Saver-6″ diameter floppy disc that has hook and loop on both sides for adhering to the backer pad and sandpaper.  This item is to prolong the life of the hook and loop part of the backer-pad  allowing the user to pull on this rather than the backer pad itself when changing paper.  This items is sold in a 4 pk.
Buy Now
Vacuum Bag Assembly–We only recommend the Fire Lock Vacuum Bag shown at left for our equipment.  This item is the removable dust containment system for our units.  you can attach it to the floor sander by slipping the hose of the exhaust port on the machine and attaching the Velcro tabs to the handle close the zipper and your ready to sand.  REMEMBER-always remove this item and empty the contents into a metal trash container when not in use!
Buy Now
Buff Pads-This is a 6″ disc product with hook and loop on one side and a tightly woven material on the other for use when needing to rough up the floor slightly between coats or when the floor needs a quick buff and coat to refresh the finish.  This item is sold in a 4 pk.
Buy Now
Removable Dust Skirt-This item is important when counting on the unit to vacuum up much of the airborne dust particles.  this item must be properly adjusted to the height of your floor for it to work properly.  after attaching the Backer Pads and sandpaper adjust this item to the  height of the floor.  This item can be removed and re positioned as often as needed.
Buy Now
25′ Cord-This item is a 25′ removable twist lock cord easy to attach and remove from the unit for ease of transport or replacement should it become damaged.
Buy Grey Cord Now Buy Yellow Cord Now
Handle Grips-This item is a comfortable grip for comfort when operating the machine.
Buy Now
Switch Cover-This item is an industrial metal switch cover protecting the electrical components on the handle of the machine.
Buy Now
Switch-This item is UL approved for use on our equipment and built for durability.
Buy Now

These are 3.5″ non-marring rubber wheels for ease of transport.
Buy Now
Wheel Replacement Kit-Includes a wheel, 2 washers, and a snap ring.
Buy Now
Poly Cog Belt-This item is universal on all our floor sanders.  The ribs of the belt should be against the metal pulleys when operating.
**We recommend purchasing a gasket when ordering a belt**
Buy Now
Gasket-This item is necessary when replacing the belt, it is located between the motor and deck plate.
Buy Now
US-Socket-This item is used to remove the Spindle Housing Nut when replacing the Spindle on the unit from the deck plate. Buy Now
SP-AS-C to replace spindle on silver/black unit when needed.
Buy Now
SP-AS-7 to replace spindle on yellow unit when needed.
Buy Now
SP-AS to replace spindle on beige unit when needed. Buy Now

Order $650 enter coupon code Ship650 to receive free shipping on your order.

 

When renting our equipment the rental center should have the items you need for this equipment.  In the event you need a part/accessory that is not locally available here is a listing of items for you to use.

16″ Backer Pad
6″ Backer Pad-6″ diameter disc that screws onto the bottom of the unit at the end of the spindle housing/lower shaft.  This item is constructed of foam with hook and loop covering for easy attachment of sandpaper.  It is sold individually or in a 12 pk.
Buy Now
2Backer Pad Saver
Backer Pad Saver-6″ diameter floppy disc that has hook and loop on both sides for adhering to the backer pad and sandpaper.  This item is to prolong the life of the hook and loop part of the backer-pad  allowing the user to pull on this rather than the backer pad itself when changing paper.  This items is sold in a 4 pk.
Buy Now
3Vacuum Bag Assembly
Vacuum Bag Assembly–We only recommend the Fire Lock Vacuum Bag shown at left for our equipment.  This item is the removable dust containment system for our units.  you can attach it to the floor sander by slipping the hose of the exhaust port on the machine and attaching the Velcro tabs to the handle close the zipper and your ready to sand.  REMEMBER-always remove this item and empty the contents into a metal trash container when not in use!
Buy Now
4Buff Pads
Buff Pads-This is a 6″ disc product with hook and loop on one side and a tightly woven material on the other for use when needing to rough up the floor slightly between coats or when the floor needs a quick buff and coat to refresh the finish.  This item is sold in a 4 pk.
Buy Now
5Removable Dust Skirt
Removable Dust Skirt-This item is important when counting on the unit to vacuum up much of the airborne dust particles.  this item must be properly adjusted to the height of your floor for it to work properly.  after attaching the Backer Pads and sandpaper adjust this item to the  height of the floor.  This item can be removed and re positioned as often as needed.
Buy Now
625′ Cord
25′ Cord-This item is a 25′ removable twist lock cord easy to attach and remove from the unit for ease of transport or replacement should it become damaged.
Buy Grey Cord Now Buy Yellow Cord Now
7Handle Grips
Handle Grips-This item is a comfortable grip for comfort when operating the machine.
Buy Now
8Switch Cover
Switch Cover-This item is an industrial metal switch cover protecting the electrical components on the handle of the machine.
Buy Now
9Switch
Switch-This item is UL approved for use on our equipment and built for durability.
Buy Now
10Wheels

These are 3.5″ non-marring rubber wheels for ease of transport.
Buy Now
11Wheel Replacement Kit
Wheel Replacement Kit-Includes a wheel, 2 washers, and a snap ring.
Buy Now
12Poly Cog Belt
Poly Cog Belt-This item is universal on all our floor sanders.  The ribs of the belt should be against the metal pulleys when operating.
**We recommend purchasing a gasket when ordering a belt**
Buy Now
13Gasket
Gasket-This item is necessary when replacing the belt, it is located between the motor and deck plate.
Buy Now

You’ll be glad you took a moment to make your floor sanding project a stand out accomplishment with the ease and cost-savings only the U-Sand family.